Pad2Pad Chemicals formulates, blends, stores, and delivers chemistry from Morgantown, WV. On the well side that means friction reducers, biocides, and scale inhibitors for stimulation, plus the production chemistry that keeps wells flowing: corrosion inhibitors, surfactants, and pipe lubricants.
Off the well, we run the TruDust dust control series, a full water treatment line for municipal, industrial, and oilfield water, and boiler and cooling tower treatment programs. Behind all of it: ISO transport with telemetry, flowback water testing, and toll blending for customer-owned formulas. One call covers the blend, the delivery, and the lab work.
We supply chemicals, move bulk product, test flowback water, and toll-blend customer formulas. The goal is to keep the job simple from the first call to the pad.
Wind speed, particle size, and particle weight decide how much dust goes airborne and how long it stays there. The smallest particles can hang for days and reach deep into the lungs. The TruDust series covers every dust source on a site, with application support to match the product to the job.
Encapsulating treatments applied by water truck, jet spray, or spot application. Treated roads stay hard and dust free for weeks under a mechanically resistant, waterproof coating that improves visibility and safety.
Knock down and collect dust at drops and transitions, stop it from reemerging, and protect the conveyor itself against corrosion.
Seal the pile surface to stop wind loss of valuable minerals, block air penetration in coal stocks to reduce spontaneous combustion risk, and keep water out. Also used for tailing dam consolidation.
Stabilize slopes and open ground, holding disturbed surfaces together and eliminating dust environment issues.
Latex based topper treatments form a flexible seal over the load that stays effective as it settles, does not evaporate in transit, and holds up through weather and load shifts.
Dust control for mining environments, plus helicopter landing zones, parking lots, race tracks, and walkways, backed by over 100 proven formulations.
Binder solutions that coat the substrate surface with an adhesive film, locking the top layer in place.
Surfactants added to water that improve its ability to wet surfaces. Water alone beads up on many materials; surfactants let it spread and penetrate.
Sticky liquid suppressants that coat dust particles and form cohesive membranes, binding adjacent particles together.
Concentrate products can be added directly to water trucks. Call us and we will match the right product to your site.
A dusty road is a deteriorating road. A dust control program lowers the total cost of ownership.
We supply a full line of water treatment chemicals for municipal systems, industrial plants, and oilfield water, from settling out solids to protecting the equipment that moves it. Test first, match the chemistry, blend it, and haul it.
Fine particles in wastewater will not settle out on their own. Coagulants bind organic and inorganic particles into larger clumps so they can be filtered out in the stages that follow. This is the first step in pulling solids out of municipal and industrial water.
Flocculants gather the clumped particles into larger flocs that settle out quickly. A critical stage for removing contaminants, and the polymer chemistry behind it has to be matched to the water being treated.
Scale and corrosion cut equipment life short, restrict flow, and drive up maintenance. Inhibitors protect metal surfaces and keep deposits from forming at low doses. That includes our own SI 820 deposit control agent for calcium carbonate and barium sulfate in hot, high iron, high solids water.
Bacteria and microbial growth foul equipment and create safety problems before water can be reused or discharged. Our biocide products provide effective disinfection for industrial wastewater and protect systems from microbial fouling.
Foam produced during treatment damages equipment and slows the whole process down. Foam control additives stop bubbles from forming in the first place, keeping tanks, basins, and clarifiers running at full efficiency.
Syensqo, one of the largest specialty chemical producers in the world, is our biggest supplier. That relationship gives our customers a direct line to world class chemistry without the overhead of buying from a global producer on their own: nitrogen derivative chemistries, phosphate esters, surfactants, and antiscalants that hold up in demanding water systems.
All brand names are trademarks of their respective owners.
Closed loops and open recirculating systems fail for different reasons. We run both as programs, not one-off drums: testing, dosing, and adjusting as the water changes.
Pad2Pad brings chemical supply, blending, logistics, and testing under one roof, on the well and off it. That means fewer delays, clearer communication, and products built for the conditions our customers actually run in.
Talk to Our TeamWe blend and ship from Morgantown, giving operators and plants faster access to chemistry without long supply-chain delays.
Stimulation and production chemistry, dust control, water treatment, and boiler and cooling tower programs from a single supplier.
We haul our own liquid chemicals with ISO and telemetry capability, so the product and the delivery schedule stay aligned.
We analyse flowback, produced, and process water first, so product selection comes off test results instead of guesswork.
Our supply partnership with Syensqo gives customers a direct line to proven chemistry, and our own blending covers anything off the shelf will not.
You are working with the people handling the product, not a disconnected reseller or middle layer.
Our products are built for real field conditions: slickwater fracs, long laterals, and recycled-water jobs on the well side, and dust, water, and thermal systems off it. Spec sheets and brochures are available below.
A high-molecular-weight anionic polyacrylamide emulsion used in slickwater frac work. It is made for strong friction reduction, steady handling, and consistent performance on heavy-sand jobs.
A cationic friction reducer for jobs where an anionic product is not the right fit, including clay-sensitive formations and produced-water makeup.
An anionic friction reducer for deep wells, higher injection rates, and extended laterals. It helps reduce friction pressure so crews can keep rates and proppant placement on target.
A polymer-based scale inhibitor for calcium carbonate and barium sulfate control. Built for high-temperature, high-iron, and recycled-water conditions.
A corrosion inhibitor for tough water systems with high TDS, high iron, and heavy scaling potential. Used to protect pipelines, flowlines, and downhole equipment.
A non-petroleum pipe lubricant made from natural-oil extract. It bonds to metal surfaces to reduce torque and drag in extended-reach laterals and coiled-tubing work.
A nonionic surfactant package for acid jobs and fracturing fluids. It helps prevent emulsion problems, supports cleaner breaks, and is useful with crudes that tend to sludge.
Oxidizing and non-oxidizing biocide programs for frac water, produced water, and storage. Used to knock down sulfate-reducing and acid-producing bacteria that sour a system, generate H2S, and drive microbially influenced corrosion. Product and dose are selected off your water analysis.
Over 100 proven formulations across encrusting agents, wetting agents, and tackifiers, covering road surfaces, conveyors and transfer points, stockpiles, embankments, rail and truck loads, and underground environments. Concentrates can be added directly to water trucks.
Coagulants and flocculants for solids removal, corrosion and scale inhibitors including SI 820, biocides for microbial control, and foam control additives. Backed by our supply partnership with Syensqo for nitrogen derivative chemistries, phosphate esters, surfactants, and antiscalants.
Boiler side: oxygen scavengers, internal scale and sludge conditioners, alkalinity and pH control, and neutralizing or filming amines for condensate return lines. Cooling side: scale and corrosion inhibitors matched to make-up water, oxidizing and non-oxidizing biocides on rotation, biodispersants that break up biofilm, and blowdown control that holds cycles of concentration.
We can help match the product to the job conditions, water source, and field schedule.
The goal is simple: keep the right chemical moving to the right location on schedule.
Testing helps identify what is in the water before it causes problems in the blend, the frac, or the system.
We keep the process practical: bring the formula, confirm the requirements, and we handle the blend.